Description
Characteristics
- Dual flush
- Compensation of dimensional tolerances possible
- Height-adjustable up to 7 cm
- Front cladding made of glass (ESG)
- Fastening height WC ceramic appliance 35 ± 1 cm
- Cistern fully insulated against condensation
- Side cladding made of aluminium brushed
- Self-supporting
- Adjustable flush volume
- Soft-touch buttons for flush actuation and odour extraction
- Orientation light and odour extraction activated when a user approaches
- Orientation light can be set in seven colours
- User detection range can be set
- Day/night detection can be set for orientation light
- Odour extraction unit with ceramic honeycomb filter can be installed without tools
- Ceramic honeycomb filter for odour neutralisation can be replaced without tools
- Odour extraction unit automatically switches off after a predefined running time
- Operation with extra-low voltage, no mains voltage in cistern
- Mains connection with flexible three-wire sheathed cable
- Water supply connection on the rear centre
- Water supply connection on the left/right possible with accessories
- Water supply connection on the bottom
Technical data
- Protection class : I
- Protection degree : IPX4
- Nominal voltage : 100-240 V AC
- Mains frequency : 50-60 Hz
- Operating voltage : 4.1 V DC
- Power consumption : 5 W
- Flow pressure : 0.1-10 bar
- Maximum operating temperature, water : 25 °C
- Flush volume, factory setting : 6 and 3 l
- Flush volume large, adjustment range : 4.5 / 6 l
- Flush volume small : 3 l
- Calculated flow rate : 0.11 l/s
- Minimum flow pressure for calculated flow rate : 0.5 bar
Scope of delivery
- Water supply connection set with 2 angle stop valves, 1/2"
- Flush bend extension 160 mm
- Sleeve made of EPDM,?ø?44 / 55 mm
- Straight connector made of PE-HD, ø 90 mm
- Adaptor socket made of PE-HD, ø 90 / 110 mm
- 2 threaded rods M12
- Sound insulation set
- Female socket for mains connection
- Power supply unit
- Base cover
- Fastening material for drywall
- Fastening material
- Fastening material for installation in front of concealed cisterns
Application purposes
- For renovations, conversions and new buildings
- For wall inlets with inlet height >23 cm
- For replacing low-level exposed cisterns
- For replacing half-high level exposed cisterns
- For replacing wall-hung WCs with close-coupled exposed cistern
- For replacing wall-hung WCs with pressure flushing valve
- For replacing wall-hung WCs with concealed cistern with maximum service opening height< 109 cm
- For Geberit AquaClean WC complete solutions
- For connecting Geberit AquaClean WC enhancement solutions, with accessories
- For mounting on finished floors
- For installation in front of drywalls or solid walls
- For compensating the offset between WC connections and wall drains
Spare Parts
Art. No. | Description |
243.440.TA.1 | Cistern lid for Geberit Monolith sanitary module for WC: aluminium brushed |
243.446.00.1 | Technical cistern for Geberit Monolith sanitary module for WC |
240.344.00.1 | Damming device for Geberit exposed cistern AP140 and Geberit Monolith |
243.442.00.1 | Flush bend for Geberit Monolith sanitary modules for WCs |
362.771.00.1 | Lip seal for Geberit flush pipe: d=45mm |
152.434.06.1 | Geberit flush bend extension with sleeve: d=45mm |
243.994.00.1 | Set of consoles for Geberit Monolith sanitary modules for WCs and bidets |
131.112.TA.1 | Set of fixing bolts made of aluminium, for Geberit Monolith side cladding (2 pc.): aluminium brushed |
243.042.JF.1 | Set of fixing bolts made of plastic, for Geberit Monolith side cladding (2 pc.): mid-grey pearl mica |
243.539.00.1 | Side cladding set for Geberit Monolith sanitary module for WC, 114 cm |
243.447.JF.1 | Side part extension for Geberit Monolith sanitary module for WC and bidet: mid-grey pearl mica |
243.444.JF.1 | Cover, bottom, for Geberit Monolith sanitary module for floor-standing WC: mid-grey pearl mica |
242.480.00.1 | Fastening set for Geberit Monolith front cladding |
242.389.00.1 | Flush valve for Geberit Monolith sanitary module for WC |
816.418.00.1 | Flat gasket for Geberit flush valves of exposed and concealed cisterns |
243.293.00.1 | Basket for flush valve, for Geberit Monolith |
242.985.00.1 | Geberit fill valve type 380, lateral water supply connection, 3/8", nipple made of brass |
242.983.00.1 | Geberit fill valve type 380, lateral water supply connection, 3/8", nipple made of brass |
242.984.00.1 | Geberit fill valve type 380, lateral water supply connection, 3/8", nipple made of brass |
Geberit fill valve type 380, side connection | |
242.670.00.1 | Extension for flush valve, for Geberit Monolith sanitary module for WC, 114 cm |
242.387.00.1 | Actuation lever with console bracket, for Geberit Monolith sanitary module for WC |
242.662.SI.1 | Front cladding for Geberit Monolith sanitary module for wall-hung WC, 114 cm: glass / white |
242.662.SJ.1 | Front cladding for Geberit Monolith sanitary module for wall-hung WC, 114 cm: glass / black |
242.662.SQ.1 | Front cladding for Geberit Monolith sanitary module for wall-hung WC, 114 cm: glass / umber |
242.662.TG.1 | Front cladding for Geberit Monolith sanitary module for wall-hung WC, 114 cm: glass / sand |
242.667.SI.1 | Front cladding for Geberit Monolith sanitary module for floor-standing WC, 114 cm: glass / white |
242.667.SJ.1 | Front cladding for Geberit Monolith sanitary module for floor-standing WC, 114 cm: glass / black |
242.667.SQ.1 | Front cladding for Geberit Monolith sanitary module for floor-standing WC, 114 cm: glass / umber |
242.667.TG.1 | Front cladding for Geberit Monolith sanitary module for floor-standing WC, 114 cm: glass / sand |
131.083.16.1 | Geberit straight connector set for WC |
131.088.29.1 | Geberit Monolith S-bend set for wall-hung WC |
Geberit Monolith connection set for floor-standing WC, with S-bend in ABS | |
131.082.16.1 | Geberit connection set for floor-standing WC |
Geberit Monolith connection set for floor-standing WC, with connection bend 90° | |
131.081.11.1 | Geberit P-bend set for floor-standing WC |
Geberit Monolith connection set for floor-standing WC, with P-bend | |
131.084.16.1 | Geberit straight connector set for wall-hung WC |
Geberit Monolith connection set for floor-standing WC, with straight connector | |
131.108.11.1 | Geberit straight connector set for wall-hung WC, stepped by 7 cm |
131.085.11.1 | Geberit straight connector set for wall-hung WC, stepped by 3 cm |
Geberit connector sets for floor-standing WC and wall-hung WC | |
388.352.29.1 | Geberit connection set for wall-hung WC, with straight connector stepped by 5 cm |
131.138.00.1 | Bottom water supply connection set for Geberit Monolith sanitary module for WC, 114 cm |
131.071.21.1 | Lateral water supply connection set for Geberit Monolith sanitary module for WC: gloss chrome-plated |
241.487.00.1 | Geberit O-ring |
Product Details
Art. no. | Surface / Colour |
131.231.SQ.5 | Glass / umber |
131.231.SI.5 | Glass / white |
131.231.TG.5 | Glass / sand |
131.231.SJ.5 | Glass / black |
Downloads
Click for Installation instructions
Click for Installation instructions
Click for Installation instructions
Click for Installation instructions
Delivery & Returns
Estimated Delivery: 2-5 working days †
Free Standard UK Delivery is available on all products to most of the UK!*
We use our own delivery team, as well as couriers and direct shipments from distributors and manufacturers for fast, safe and secure deliveries. We advise you to make arrangements with plumbers and fitters after your order has arrived.
Stock Availability
Please contact us to confirm stock prior to ordering to avoid any disappointment.
While we stock a limited number of products within our warehouse, other products may be stored elsewhere by suppliers, distributors or dire...
Estimated Delivery: 2-5 working days †
Free Standard UK Delivery is available on all products to most of the UK!*
We use our own delivery team, as well as couriers and direct shipments from distributors and manufacturers for fast, safe and secure deliveries. We advise you to make arrangements with plumbers and fitters after your order has arrived.
Stock Availability
Please contact us to confirm stock prior to ordering to avoid any disappointment.
While we stock a limited number of products within our warehouse, other products may be stored elsewhere by suppliers, distributors or direct from manufacturers themselves. This means that some products may experience longer lead times than others if new stock is required. If this is the case, we aim to notify you as soon as possible and if you're happy to continue, the new stock will be ordered.
Returns
A notification to Unbeatable Bathrooms must be made within 30 days of receipt of your goods, in writing via email to info@unbeatablebathrooms.co.uk and fully outlining the relevant issue/cause for the requirement to return the said goods.
†Estimated delivery is based on average delivery times. This timescale may vary based on individual items and is not a guarantee. If new stock is required, delivery may take longer than expected. If the estimated delivery date exceeds 5 working days, we aim to notify customers accordingly at the earliest convenience.
*Free Standard Delivery on all products to UK mainland only - excluding Scotland. (Excluding Tile products. If total order value is < £250 and includes Tile products, a delivery charge of £20 is applied. If total order value is > £250, delivery is Free). Click here to view our full Delivery & Refunds T&Cs.
Price Match Promise
Found this product cheaper somewhere else? With our Price Match Promise, we'll match the total cost (including delivery) to any other online retailer**.
Complete our short Price Match form and our dedicated team will see if the item is eligible.
No Price Matching after purchase.
Description
Delivery & Returns
Price Match Promise
Characteristics
- Dual flush
- Compensation of dimensional tolerances possible
- Height-adjustable up to 7 cm
- Front cladding made of glass (ESG)
- Fastening height WC ceramic appliance 35 ± 1 cm
- Cistern fully insulated against condensation
- Side cladding made of aluminium brushed
- Self-supporting
- Adjustable flush volume
- Soft-touch buttons for flush actuation and odour extraction
- Orientation light and odour extraction activated when a user approaches
- Orientation light can be set in seven colours
- User detection range can be set
- Day/night detection can be set for orientation light
- Odour extraction unit with ceramic honeycomb filter can be installed without tools
- Ceramic honeycomb filter for odour neutralisation can be replaced without tools
- Odour extraction unit automatically switches off after a predefined running time
- Operation with extra-low voltage, no mains voltage in cistern
- Mains connection with flexible three-wire sheathed cable
- Water supply connection on the rear centre
- Water supply connection on the left/right possible with accessories
- Water supply connection on the bottom
Technical data
- Protection class : I
- Protection degree : IPX4
- Nominal voltage : 100-240 V AC
- Mains frequency : 50-60 Hz
- Operating voltage : 4.1 V DC
- Power consumption : 5 W
- Flow pressure : 0.1-10 bar
- Maximum operating temperature, water : 25 °C
- Flush volume, factory setting : 6 and 3 l
- Flush volume large, adjustment range : 4.5 / 6 l
- Flush volume small : 3 l
- Calculated flow rate : 0.11 l/s
- Minimum flow pressure for calculated flow rate : 0.5 bar
Scope of delivery
- Water supply connection set with 2 angle stop valves, 1/2"
- Flush bend extension 160 mm
- Sleeve made of EPDM,?ø?44 / 55 mm
- Straight connector made of PE-HD, ø 90 mm
- Adaptor socket made of PE-HD, ø 90 / 110 mm
- 2 threaded rods M12
- Sound insulation set
- Female socket for mains connection
- Power supply unit
- Base cover
- Fastening material for drywall
- Fastening material
- Fastening material for installation in front of concealed cisterns
Application purposes
- For renovations, conversions and new buildings
- For wall inlets with inlet height >23 cm
- For replacing low-level exposed cisterns
- For replacing half-high level exposed cisterns
- For replacing wall-hung WCs with close-coupled exposed cistern
- For replacing wall-hung WCs with pressure flushing valve
- For replacing wall-hung WCs with concealed cistern with maximum service opening height< 109 cm
- For Geberit AquaClean WC complete solutions
- For connecting Geberit AquaClean WC enhancement solutions, with accessories
- For mounting on finished floors
- For installation in front of drywalls or solid walls
- For compensating the offset between WC connections and wall drains
Spare Parts
Art. No. | Description |
243.440.TA.1 | Cistern lid for Geberit Monolith sanitary module for WC: aluminium brushed |
243.446.00.1 | Technical cistern for Geberit Monolith sanitary module for WC |
240.344.00.1 | Damming device for Geberit exposed cistern AP140 and Geberit Monolith |
243.442.00.1 | Flush bend for Geberit Monolith sanitary modules for WCs |
362.771.00.1 | Lip seal for Geberit flush pipe: d=45mm |
152.434.06.1 | Geberit flush bend extension with sleeve: d=45mm |
243.994.00.1 | Set of consoles for Geberit Monolith sanitary modules for WCs and bidets |
131.112.TA.1 | Set of fixing bolts made of aluminium, for Geberit Monolith side cladding (2 pc.): aluminium brushed |
243.042.JF.1 | Set of fixing bolts made of plastic, for Geberit Monolith side cladding (2 pc.): mid-grey pearl mica |
243.539.00.1 | Side cladding set for Geberit Monolith sanitary module for WC, 114 cm |
243.447.JF.1 | Side part extension for Geberit Monolith sanitary module for WC and bidet: mid-grey pearl mica |
243.444.JF.1 | Cover, bottom, for Geberit Monolith sanitary module for floor-standing WC: mid-grey pearl mica |
242.480.00.1 | Fastening set for Geberit Monolith front cladding |
242.389.00.1 | Flush valve for Geberit Monolith sanitary module for WC |
816.418.00.1 | Flat gasket for Geberit flush valves of exposed and concealed cisterns |
243.293.00.1 | Basket for flush valve, for Geberit Monolith |
242.985.00.1 | Geberit fill valve type 380, lateral water supply connection, 3/8", nipple made of brass |
242.983.00.1 | Geberit fill valve type 380, lateral water supply connection, 3/8", nipple made of brass |
242.984.00.1 | Geberit fill valve type 380, lateral water supply connection, 3/8", nipple made of brass |
Geberit fill valve type 380, side connection | |
242.670.00.1 | Extension for flush valve, for Geberit Monolith sanitary module for WC, 114 cm |
242.387.00.1 | Actuation lever with console bracket, for Geberit Monolith sanitary module for WC |
242.662.SI.1 | Front cladding for Geberit Monolith sanitary module for wall-hung WC, 114 cm: glass / white |
242.662.SJ.1 | Front cladding for Geberit Monolith sanitary module for wall-hung WC, 114 cm: glass / black |
242.662.SQ.1 | Front cladding for Geberit Monolith sanitary module for wall-hung WC, 114 cm: glass / umber |
242.662.TG.1 | Front cladding for Geberit Monolith sanitary module for wall-hung WC, 114 cm: glass / sand |
242.667.SI.1 | Front cladding for Geberit Monolith sanitary module for floor-standing WC, 114 cm: glass / white |
242.667.SJ.1 | Front cladding for Geberit Monolith sanitary module for floor-standing WC, 114 cm: glass / black |
242.667.SQ.1 | Front cladding for Geberit Monolith sanitary module for floor-standing WC, 114 cm: glass / umber |
242.667.TG.1 | Front cladding for Geberit Monolith sanitary module for floor-standing WC, 114 cm: glass / sand |
131.083.16.1 | Geberit straight connector set for WC |
131.088.29.1 | Geberit Monolith S-bend set for wall-hung WC |
Geberit Monolith connection set for floor-standing WC, with S-bend in ABS | |
131.082.16.1 | Geberit connection set for floor-standing WC |
Geberit Monolith connection set for floor-standing WC, with connection bend 90° | |
131.081.11.1 | Geberit P-bend set for floor-standing WC |
Geberit Monolith connection set for floor-standing WC, with P-bend | |
131.084.16.1 | Geberit straight connector set for wall-hung WC |
Geberit Monolith connection set for floor-standing WC, with straight connector | |
131.108.11.1 | Geberit straight connector set for wall-hung WC, stepped by 7 cm |
131.085.11.1 | Geberit straight connector set for wall-hung WC, stepped by 3 cm |
Geberit connector sets for floor-standing WC and wall-hung WC | |
388.352.29.1 | Geberit connection set for wall-hung WC, with straight connector stepped by 5 cm |
131.138.00.1 | Bottom water supply connection set for Geberit Monolith sanitary module for WC, 114 cm |
131.071.21.1 | Lateral water supply connection set for Geberit Monolith sanitary module for WC: gloss chrome-plated |
241.487.00.1 | Geberit O-ring |
Product Details
Art. no. | Surface / Colour |
131.231.SQ.5 | Glass / umber |
131.231.SI.5 | Glass / white |
131.231.TG.5 | Glass / sand |
131.231.SJ.5 | Glass / black |
Downloads
Click for Installation instructions
Click for Installation instructions
Click for Installation instructions
Click for Installation instructions
Estimated Delivery: 2-5 working days †
Free Standard UK Delivery is available on all products to most of the UK!*
We use our own delivery team, as well as couriers and direct shipments from distributors and manufacturers for fast, safe and secure deliveries. We advise you to make arrangements with plumbers and fitters after your order has arrived.
Stock Availability
Please contact us to confirm stock prior to ordering to avoid any disappointment.
While we stock a limited number of products within our warehouse, other products may be stored elsewhere by suppliers, distributors or dire...
Estimated Delivery: 2-5 working days †
Free Standard UK Delivery is available on all products to most of the UK!*
We use our own delivery team, as well as couriers and direct shipments from distributors and manufacturers for fast, safe and secure deliveries. We advise you to make arrangements with plumbers and fitters after your order has arrived.
Stock Availability
Please contact us to confirm stock prior to ordering to avoid any disappointment.
While we stock a limited number of products within our warehouse, other products may be stored elsewhere by suppliers, distributors or direct from manufacturers themselves. This means that some products may experience longer lead times than others if new stock is required. If this is the case, we aim to notify you as soon as possible and if you're happy to continue, the new stock will be ordered.
Returns
A notification to Unbeatable Bathrooms must be made within 30 days of receipt of your goods, in writing via email to info@unbeatablebathrooms.co.uk and fully outlining the relevant issue/cause for the requirement to return the said goods.
†Estimated delivery is based on average delivery times. This timescale may vary based on individual items and is not a guarantee. If new stock is required, delivery may take longer than expected. If the estimated delivery date exceeds 5 working days, we aim to notify customers accordingly at the earliest convenience.
*Free Standard Delivery on all products to UK mainland only - excluding Scotland. (Excluding Tile products. If total order value is < £250 and includes Tile products, a delivery charge of £20 is applied. If total order value is > £250, delivery is Free). Click here to view our full Delivery & Refunds T&Cs.
Found this product cheaper somewhere else? With our Price Match Promise, we'll match the total cost (including delivery) to any other online retailer**.
Complete our short Price Match form and our dedicated team will see if the item is eligible.
No Price Matching after purchase.